name: libakgl CI Build
run-name: ${{ gitea.actor }} libakgl test
on: [push]

jobs:
  cmake_build:
    runs-on: ubuntu-latest
    steps:
      - name: Check out repository code
        uses: actions/checkout@v4
        with:
          submodules: recursive
      - name: Install build dependencies
        run: |
          sudo apt-get update -y
          sudo apt-get install -y \
            cmake doxygen gcc gcovr pkg-config \
            libasound2-dev libfreetype-dev libharfbuzz-dev \
            libpng-dev libtiff-dev libwebp-dev \
            libudev-dev libx11-dev libxcursor-dev libxext-dev \
            libxfixes-dev libxi-dev libxrandr-dev libxrender-dev \
            libxss-dev libxtst-dev
      - name: Configure and build
        run: |
          cmake -S . -B build \
            -DCMAKE_BUILD_TYPE=Debug \
            -DAKGL_COVERAGE=ON
          cmake --build build --parallel
      - name: Build API documentation
        run: doxygen Doxyfile
      # The perf suites run here too -- they are ordinary CTest tests -- but this
      # is a Debug build with coverage instrumentation, where a timing is a
      # measurement of gcov. AKGL_BENCH_SCALE cuts their iteration counts so
      # they contribute path coverage without spending ten minutes proving
      # nothing; benchutil.h already refuses to enforce budgets in an
      # unoptimized build. The performance job below is where the timings are
      # taken and the budgets are checked.
      - name: Test (JUnit)
        env:
          AKGL_BENCH_SCALE: '0.02'
        run: |
          export LD_LIBRARY_PATH="$PWD/build:$PWD/build/deps/SDL:$PWD/build/deps/SDL_image:$PWD/build/deps/SDL_mixer:$PWD/build/deps/SDL_ttf"
          ctest \
            --test-dir build \
            -E '^character$' \
            --output-on-failure \
            --output-junit "$(pwd)/ctest-junit.xml"
      - name: Publish test results
        if: always()
        uses: mikepenz/action-junit-report@v4
        with:
          report_paths: 'ctest-junit.xml'
          annotate_only: true
          detailed_summary: true
          include_passed: true
          fail_on_failure: 'true'
      - name: Upload coverage reports
        if: always()
        uses: actions/upload-artifact@v4
        with:
          name: code-coverage
          path: build/coverage/
          if-no-files-found: warn

  # The benchmarks, in the only build where their numbers mean anything.
  # tests/benchutil.h enforces a budget per measurement only when it is compiled
  # optimized and running at full scale, which is exactly this job and no other:
  # the coverage job above is Debug, and the memory job below is under valgrind.
  # A budget is roughly ten times the baseline recorded in PERFORMANCE.md, which
  # is what makes a shared, slower runner viable -- it catches an algorithmic
  # regression and ignores a busy machine. If a budget still proves flaky here,
  # raise that one budget with a measurement behind it and re-record the
  # baseline; do not drop the gate.
  performance:
    runs-on: ubuntu-latest
    steps:
      - name: Check out repository code
        uses: actions/checkout@v4
        with:
          submodules: recursive
      - name: Install build dependencies
        run: |
          sudo apt-get update -y
          sudo apt-get install -y \
            cmake gcc pkg-config \
            libasound2-dev libfreetype-dev libharfbuzz-dev \
            libpng-dev libtiff-dev libwebp-dev \
            libudev-dev libx11-dev libxcursor-dev libxext-dev \
            libxfixes-dev libxi-dev libxrandr-dev libxrender-dev \
            libxss-dev libxtst-dev
      - name: Configure and build
        run: |
          cmake -S . -B build \
            -DCMAKE_BUILD_TYPE=RelWithDebInfo
          cmake --build build --parallel
      # --verbose rather than --output-on-failure: a passing benchmark's output
      # is the entire point of running it, and --output-on-failure prints
      # nothing at all for a green run. pipefail because the step ends in a
      # pipe, whose status would otherwise be tee's -- always 0 -- and a blown
      # budget would be reported as a passing step.
      - name: Benchmarks (JUnit)
        run: |
          set -o pipefail
          export LD_LIBRARY_PATH="$PWD/build:$PWD/build/deps/SDL:$PWD/build/deps/SDL_image:$PWD/build/deps/SDL_mixer:$PWD/build/deps/SDL_ttf"
          ctest \
            --test-dir build \
            -L perf \
            --verbose \
            --output-junit "$(pwd)/perf-junit.xml" \
            2>&1 | tee "$(pwd)/perf-baseline.txt"
      - name: Publish benchmark results
        if: always()
        uses: mikepenz/action-junit-report@v4
        with:
          report_paths: 'perf-junit.xml'
          annotate_only: true
          detailed_summary: true
          include_passed: true
          fail_on_failure: 'true'
      # Kept whether the job passed or failed: the tables are the point. A run
      # that went red says which measurement moved, and a run that went green is
      # the next baseline if somebody re-records PERFORMANCE.md.
      - name: Upload benchmark tables
        if: always()
        uses: actions/upload-artifact@v4
        with:
          name: performance-baseline
          path: perf-baseline.txt
          if-no-files-found: warn

  # Every suite under valgrind. No memory-check programs of their own: the perf
  # suites scale themselves down when they detect valgrind, which turns them
  # into the broadest path coverage in the tree at a cost this job can afford.
  #
  # This job gates. A definite leak, a read past the end of an allocation, or a
  # branch on uninitialised memory fails the build on the push that introduced
  # it -- not on the day somebody gets around to caring. The six findings this
  # job had on its first run were fixed to make that possible rather than
  # excused into a warning.
  memory_check:
    runs-on: ubuntu-latest
    steps:
      - name: Check out repository code
        uses: actions/checkout@v4
        with:
          submodules: recursive
      - name: Install memory-check dependencies
        run: |
          sudo apt-get update -y
          sudo apt-get install -y \
            cmake gcc pkg-config valgrind \
            libasound2-dev libfreetype-dev libharfbuzz-dev \
            libpng-dev libtiff-dev libwebp-dev \
            libudev-dev libx11-dev libxcursor-dev libxext-dev \
            libxfixes-dev libxi-dev libxrandr-dev libxrender-dev \
            libxss-dev libxtst-dev
      # RelWithDebInfo rather than Debug: valgrind needs the symbols, and -O0
      # would leave every inlined frame in the stacks it prints.
      - name: Configure and build
        run: |
          cmake -S . -B build \
            -DCMAKE_BUILD_TYPE=RelWithDebInfo
          cmake --build build --parallel
      # The character suite is excluded here for the same reason as in the
      # coverage job: it fails deliberately, and a failing suite would be
      # reported as "valgrind found nothing but ctest exited non-zero".
      - name: Memory check
        run: scripts/memcheck.sh -E '^character$'
      - name: Upload valgrind logs
        if: always()
        uses: actions/upload-artifact@v4
        with:
          name: valgrind-logs
          path: build/Testing/Temporary/MemoryChecker.*.log
          if-no-files-found: warn

  mutation_test:
    runs-on: ubuntu-latest
    steps:
      - name: Check out repository code
        uses: actions/checkout@v4
        with:
          submodules: recursive
      - name: Install mutation-test dependencies
        run: |
          sudo apt-get update -y
          sudo apt-get install -y \
            cmake gcc pkg-config python3 \
            libasound2-dev libfreetype-dev libharfbuzz-dev \
            libpng-dev libtiff-dev libwebp-dev \
            libudev-dev libx11-dev libxcursor-dev libxext-dev \
            libxfixes-dev libxi-dev libxrandr-dev libxrender-dev \
            libxss-dev libxtst-dev
      # Keep CI bounded to a focused source file. Run the default target locally
      # for the complete libakgl-owned src/ tree.
      - name: Mutation testing
        run: |
          python3 scripts/mutation_test.py \
            --target src/staticstring.c \
            --junit mutation-junit.xml \
            --threshold 50
      - name: Publish mutation results
        if: always()
        uses: mikepenz/action-junit-report@v4
        with:
          report_paths: 'mutation-junit.xml'
          annotate_only: true
          detailed_summary: true
          include_passed: true
          fail_on_failure: 'false'