libakstdlib/.gitea/workflows/ci.yaml

name: libakstdlib CI Build
run-name: ${{ gitea.actor }} libakstdlib test
on: [push]

jobs:
  cmake_build:
    runs-on: ubuntu-latest
    steps:
      - run: echo "Triggered by ${{ gitea.event_name }} from ${{ gitea.repository }}@${{ gitea.ref }}. Building on ${{ runner.os }}."
      - name: Check out repository code
        uses: actions/checkout@v4
        with:
          # A top-level build uses deps/libakerror via add_subdirectory, so the
          # submodule has to be present or the configure step fails outright.
          submodules: recursive
      - name: dependencies
        run: |
          sudo apt-get update -y
          sudo apt-get install -y cmake gcc moreutils
      # This step used to clone and install libakerror@main as well. That was two
      # different libakerrors depending on where you built: the install went to
      # /usr/local, while the build below is top-level and so compiles
      # deps/libakerror at the pinned commit via add_subdirectory -- the
      # installed one was never actually linked against. TODO.md 2.3.
      #
      # The submodule wins. It is the version this repository pins, tests and
      # ships against, and a CI that tests a different one is testing something
      # nobody runs. `cmake --install` below still installs both, so the
      # find_package and pkg-config paths are exercised.
      - name: build and test
        run: |
          # -DAKSL_WERROR=ON here and not locally: a warning that stops the build
          # mid-thought teaches people to turn warnings off, but a warning that
          # reaches main is one nobody will ever look at again.
          cmake -S . -B build -DAKSL_WERROR=ON
          cmake --build build
          sudo cmake --install build
          ctest --test-dir build --output-on-failure
      - run: echo "🍏 This job's status is ${{ job.status }}."

  # The sanitizer build is its own job rather than a step on the one above,
  # because three of the defects fixed in 0.2.0 only ever misbehaved under
  # instrumentation and the tests that pin them are worth failing on their own.
  sanitizers:
    runs-on: ubuntu-latest
    steps:
      - name: Check out repository code
        uses: actions/checkout@v4
        with:
          submodules: recursive
      - name: dependencies
        run: |
          sudo apt-get update -y
          sudo apt-get install -y cmake gcc
      - name: build and test under ASan + UBSan
        run: |
          cmake -S . -B build-asan -DAKSL_SANITIZE=ON -DAKSL_WERROR=ON
          cmake --build build-asan
          ctest --test-dir build-asan --output-on-failure
      - run: echo "🍏 This job's status is ${{ job.status }}."

  coverage:
    runs-on: ubuntu-latest
    steps:
      - name: Check out repository code
        uses: actions/checkout@v4
        with:
          submodules: recursive
      - name: dependencies
        run: |
          sudo apt-get update -y
          sudo apt-get install -y cmake gcc python3
      # scripts/coverage.py needs nothing but python3 and gcc's own gcov, so
      # there is no lcov/gcovr to install here.
      #
      # The gate is a ratchet, not a target. Across all four sources the suite
      # covers 99.5% of lines (1643/1651), 46.0% of branches and 100% of
      # functions (147/147), so 90/40 fails on a real regression -- a test
      # deleted, or new untested code added -- without tripping over rounding.
      # The report is printed either way; the uncovered lines it lists are the
      # missing tests.
      #
      # Eight lines are uncovered and every one is deliberate: four
      # `HANDLE(e, AKERR_ITERATOR_BREAK)` macro artifacts, the size_t overflow
      # guard in strbuf_reserve (reaching it needs a buffer near SIZE_MAX), and
      # the short transfer with neither feof nor ferror set, which the standard
      # permits and Linux never produces. README.md has the detail.
      #
      # Branch coverage sits far below line coverage because most branches are
      # inside libakerror's FAIL_*/ATTEMPT/FINISH expansions -- pool exhaustion,
      # stack-trace limits, akerr_valid_error_address failures -- which this
      # library has no way to reach. Chasing them here would be testing
      # libakerror's macros, which is libakerror's mutation suite's job: macros
      # expand at the call site, so coverage cannot see them properly from
      # either side. The gate stays at 40 for that reason and not for want of
      # tests.
      - name: coverage
        run: |
          cmake -S . -B build-coverage -DAKSL_COVERAGE=ON \
                -DAKSL_COVERAGE_THRESHOLD=90 \
                -DAKSL_COVERAGE_BRANCH_THRESHOLD=40
          cmake --build build-coverage
          ctest --test-dir build-coverage --output-on-failure
          cat build-coverage/coverage-summary.txt
      - run: echo "🍏 This job's status is ${{ job.status }}."

  mutation_test:
    runs-on: ubuntu-latest
    steps:
      - name: Check out repository code
        uses: actions/checkout@v4
        with:
          # The harness copies the repo and builds the copy top-level, so it
          # needs deps/libakerror present just like the main job does.
          submodules: recursive
      - name: dependencies
        run: |
          sudo apt-get update -y
          sudo apt-get install -y cmake gcc moreutils python3
      # Verify the tests actually catch bugs: break the library many ways and
      # confirm the suite fails. Gated on src/stdlib.c (fast, deterministic);
      # run the full default target locally for the macro header as well.
      #
      # The threshold is a ratchet, not a quality bar. The score is 89.6%
      # (155/173 killed) now that TODO.md sections 1.2-1.6 have tests; it was
      # 46.8% when only the list and tree functions were covered. 80 leaves
      # headroom for the runner while still failing on a real regression (tests
      # deleted, or new untested code added). The 18 survivors are listed in the
      # published report -- each one is a missing assertion.
      - name: mutation testing
        run: |
          python3 scripts/mutation_test.py \
            --target src/stdlib.c \
            --junit mutation-junit.xml \
            --threshold 80
      # Publish even when the threshold gate fails, so survivors are visible --
      # each one is a missing test. Display-only (fail_on_failure: false); the
      # --threshold above is the gate. annotate_only avoids the Checks API 404
      # on Gitea (mikepenz/action-junit-report#23).
      - name: publish mutation results
        if: always()
        uses: mikepenz/action-junit-report@v4
        with:
          report_paths: 'mutation-junit.xml'
          annotate_only: true
          detailed_summary: true
          include_passed: true
          fail_on_failure: 'false'
      - run: echo "🍏 This job's status is ${{ job.status }}."